Reset ML-1640 and ML-2240 for Refill Toner

I will give you the download link and how to do this. Instead of giving you the whole package, I provide them in 2 packages for each printer model, the raw package and the simple package.

 

The Raw Package contains the original firmware upgrades from Samsung with the patches and firmware downloads. With this package you’ll need to run the complete steps as I did.

 

The Simple package contains only the patched version of firmware so you only need to do the final step as I did.

 

But before you begin, Please read the facts carefully:

The firmware upgrades included in the raw package are official version downloaded from SAMSUNG website.

The firmware file included in the simple package are the patched version.

I’ve run the patches for a Samsung ML-1640 and it works fine till now, but I never test the fix for ML-2240, however I also supply the file because it’s provided by the same patches.

My operating system is Windows XP SP2.

 

• Raw Package for ML-1640

•  

• You will find 5 files in this package:

• ML-1640_V1.01.00.83.exe is the official firmware upgrade

  downl1640.bat is the firmware downloads (to printer)
  fix1640.bat is the firmware patches
  fixml40.exe is the tools run by the patches
  usbprns2.exe is the tools run by the downloads

  

• Click here to download Raw Package for ML-1640

•  

• Raw Package for ML-2240

•  

• You will find 5 files in this package:

• ML-2240_V1.01.00.83.exe is the official firmware upgrade

  downl2240.bat is the firmware downloads (to printer)

  fix2240.bat is the firmware patches

  fixml40.exe is the tools run by the patches

  usbprns2.exe is the tools run by the downloads 

• 

• Click here to download Raw Package for ML-2240

• How to do with the Raw Package?

  Please follow these steps if you use the Raw Package:

  
  

  Extract the package, by default it will go to a new folder with the same name as the package

  Run the official firmware upgrades (ML-XX40 _V1.01.00.83.exe)

  
  Choose which connection is used for the printer (USB/Network), this printer model is only available with USB connection.

  
  See the temporary folder used for the firmware on 2nd panel “Select Downloaded Firmware” in File Name field. Open the specified folder and copy the specified file name (with fls extension) to the package folder.

  
  Now close the firmware upgrades.

  Run the firmware patches (fixXX40.bat) and you will find new firmware file in the same folder with prefix “FIX_”, press any key to exit the patches.

  Make sure your printer is turned on and is properly connected to your computer.

  
  Run the firmware down-loader (downlXX40.bat), DO NOT turn off or disconnect the printer/computer during this process.

  That should be it, now press any key to exit the down-loader, turn off your printer for about 10 seconds and turn it back on.

•  

• Simple Package for ML-1640

• You will find 3 files in this package:

  FIX_ML1640_V1010083.fls is the patched firmware

  • downl1640.bat is the firmware downloads (to printer)
  • usbprns2.exe is the tools run by the downloads

  

  Click here to download Simple Package for ML-1640

•  

• Simple Package for ML-2240

•  

• You will find 3 files in this package:

  • FIX_ML2240_V1010083.fls is the patched firmware
  • downl2240.bat is the firmware downloads (to printer)
  • usbprns2.exe is the tools run by the downloads

  

  Click here to download Simple Package for ML-2240

   

• How to do with the Simple Package?

  You only need to run the firmware down-loader (downlXX40.bat), DO NOT turn off or disconnect the printer/computer during this process. That should be it, now press any key to exit the downloads, turn off your printer for about 10 seconds and turn it back on.

   

• Do Drop your comments and feedback below if you thank this post.

Tweet